Ki Adi Mundi Head and Kaminoan Neck Piece
+9
Ham701
Halen
Burman
Chaotic Good
DarthPineapple
MikeZulu
Tac
eclipsegrafx
Clashy
13 posters
Page 1 of 1
How good is the Ki Adi Head? And would you buy one for a reasonable price?
Ki Adi Mundi Head and Kaminoan Neck Piece
Just a few more things I've been working on with my lathe.
Ki Adi Mundi Head
Kaminoan Neck
Ki Adi Mundi Head silicone mold
Now I made sure that the Ki Adi head is seamless, that little white or gray bit you see is just the Milliput I used to bond it. And I ran it though my lathe afterwards to make sure it was nice and smooth.
And I'm not sure if I'll go anywhere with the Kaminoan neck, but if there's enough interest in it, I might decide to cast it. It still does need a bit of work before it would be casted.
I also just got my casting supplies and started casting a few custom pieces, it sets rather quickly, so I should have a couple of prototype pieces sometime tomorrow.
C&C Welcome
Thanks for viewing!
-Aaron
Ki Adi Mundi Head
Kaminoan Neck
Ki Adi Mundi Head silicone mold
Now I made sure that the Ki Adi head is seamless, that little white or gray bit you see is just the Milliput I used to bond it. And I ran it though my lathe afterwards to make sure it was nice and smooth.
And I'm not sure if I'll go anywhere with the Kaminoan neck, but if there's enough interest in it, I might decide to cast it. It still does need a bit of work before it would be casted.
I also just got my casting supplies and started casting a few custom pieces, it sets rather quickly, so I should have a couple of prototype pieces sometime tomorrow.
C&C Welcome
Thanks for viewing!
-Aaron
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
Have to say that the head is pretty darn kool. And since I don't see many being made (if any) then I vote for top dollars for it.
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
eclipsegrafx wrote:Have to say that the head is pretty darn kool. And since I don't see many being made (if any) then I vote for top dollars for it.
Well, I plan on opening my own shop - "Clashy's Customizables!"
So expect many, if people like them that is.
And sorry mods for the screwed up misspellings/screw-ups in the poll and whatnot. (Fatigue + Incoherency + Fumes = Durrhuurr?)
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
Ki Adi's head, I think is too tall.
The Kaminoan neck needs to be more special, more Kaminoan. At the moment it looks you just added a cylinder block to separate the torso and the head, just like what everyone usually does when making Kaminoan minifigs.
These are relatively simple designs - I won't pay more than $3, if that...
The Kaminoan neck needs to be more special, more Kaminoan. At the moment it looks you just added a cylinder block to separate the torso and the head, just like what everyone usually does when making Kaminoan minifigs.
These are relatively simple designs - I won't pay more than $3, if that...
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
MikeZulu wrote:Ki Adi's head, I think is too tall.
The Kaminoan neck needs to be more special, more Kaminoan. At the moment it looks you just added a cylinder block to separate the torso and the head, just like what everyone usually does when making Kaminoan minifigs.
These are relatively simple designs - I won't pay more than $3, if that...
Yes, but I took the time to chop through it and make it nice, smooth, and conformed to the "minifig neck - people usually don't do that.
And if you can make one as good as this, let me know how "easy" it is and tell me you want to charge a relatively low amount for a piece that took a good amount of time to make, along with a chunk of relatively expensive resin and dyes.
-Aaron
Last edited by Clashy on Sat Feb 27, 2010 9:21 am; edited 1 time in total
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
They are really awesome, although I think $7 is too much. I'd say around $4-$5 would be a good price.
DarthPineapple- VIP Former Staff
- Age : 29
Location : The Netherlands
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
Clashy wrote:And if you can make one as good as this, let me know how "easy" it is and tell me you want to charge a relatively low amount for a piece that took a good amount of time to make, along with a chunk of relatively expensive resin and dyes.
I don't care how easy or hard it is - if there's too little special about your designs, then, to me, a higher price for them is unreasonable.
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
A Ki-adi-mundi head is actually quite special and unique. No-one else has made them except when part of figures and already decalled/printed. A head by itself is, at the moment, unique.
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
A very nice custom. The ki-adi-mundi head looks amazing, I would certainly buy one.
The kaminoan neck is also quite good, again I would buy one.
The kaminoan neck is also quite good, again I would buy one.
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
I realize they are just prototypes at the time but I think a finished custom minifig would better help people gauge the value of the parts.
The Ki-adi-mundi is pretty awesome and definitely unique as CG said.
The Ki-adi-mundi is pretty awesome and definitely unique as CG said.
Halen- VIP Former Staff
- Age : 39
Location : Copley, Ohio
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
Anywhere from 4-6 dollars, but I have a question: Will these only come in yellow(Ki-Adi-Mundi Head)? Not that I've actually seen anyone have a flesh dye product.
Ham701- Non-Guild Member
- Location : The Labyrinth.
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
Mmm, vanilla rice milk.
I don't know what that is but it sounds tasty.
That actually looks very cool; the only thing I'd say was that the Kaminoan neckpiece would look best under a specifically shaped Kaminoan head; it wouldn't look quite as good beneath your average minifigure head.
I don't know what that is but it sounds tasty.
That actually looks very cool; the only thing I'd say was that the Kaminoan neckpiece would look best under a specifically shaped Kaminoan head; it wouldn't look quite as good beneath your average minifigure head.
80-0- Non-Guild Member
- Age : 29
Location : New York, New YORK!
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
I would love to buy up a ki-adi mundi head for around 4-5 dollars but I’d only buy one if it came in flesh.
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
The Kaminoan neck looks somewhat too long and Ki Adi Mundi's a bit too tall.
Re: Ki Adi Mundi Head and Kaminoan Neck Piece
Nice customs . I'd buy them if you got to choose what color you want them to be.
Ex: Ki-Adi Mundi in flesh and Kominoan neck in white/black.
Ex: Ki-Adi Mundi in flesh and Kominoan neck in white/black.
Similar topics
» Kaminoan Help Needed
» CT44's Commander Gree
» WIP Mech Head
» Head For The Hills!
» Scared Flesh Heads Are here
» CT44's Commander Gree
» WIP Mech Head
» Head For The Hills!
» Scared Flesh Heads Are here
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|