Customizers and Builders Guild
Welcome to the Customizers And Builders Guild Forums, remodeled from the Clone Army Builders Guild!
You are welcome to browse as a Guest, but we invite
you to take advantage of more abilities by registering
for our website, and applying to the Guild later on.

BladeHunter Mech

View previous topic View next topic Go down

BladeHunter Mech

Post by Axel on Sun Jun 20, 2010 6:59 am



Frame based on Lord Dane's.
avatar
Axel
Non-Guild Member
Non-Guild Member

Age : 23
Location : Australia


Back to top Go down

Re: BladeHunter Mech

Post by Hazard with a Glove on Sun Jun 20, 2010 7:55 am

It looks cool, but could be better. First off, it seems kind of chunky/boxy. Maybe give it a sort of mechanical look, like the lower part of the legs are now. Second, the click hinges at the shoulders give a weird look. I suggest using a different piece for that part. Although I really can't think of the right part to goo there.

It still looks good, just not quite great. Smile
avatar
Hazard with a Glove
Guild Member
Guild Member

Age : 21
Location : Once upon a time, in a magical forrest....


Back to top Go down

Re: BladeHunter Mech

Post by Legomotion95 on Sun Jun 20, 2010 3:08 pm

I like it, looks sort of Terminator-esque. Can we have an exploded view please Axel.
avatar
Legomotion95
Non-Guild Member
Non-Guild Member

Age : 22
Location : 4 Tapley Avenue


Back to top Go down

Re: BladeHunter Mech

Post by Troopa Daisy on Sun Jun 20, 2010 4:07 pm

A bit too square, but I like the torso area! Wink Smile
avatar
Troopa Daisy
Halo Kitty
Halo Kitty

Age : 22
Location : Vancouver, BC Canada. GO CANUCKS GO!


http://www.flickr.com/photos/43597477@N02/

Back to top Go down

Re: BladeHunter Mech

Post by bl*c on Sun Jun 20, 2010 4:15 pm

^^^Kind of agree with Hazard, it's a great mech, but the shoulder to arm joint doesn't work for me.

Maybe flip that piece around so the stud faces down.

Then instead of holding the holder piece with a 1x2 tile w/stud, use a 1x2 or a 1x3 plate and put the holder piece in either the middle (for the 1x3) or the very end (for the 1x2)

Then add stuff onto the remaining studs from the plates. I's suggest you add cheese slopes if you go on with my idea.

Reference:
= "That Piece"

= "Holder Piece"

I hope this helps, and if doesn't, sorry. Surprised
avatar
bl*c
Non-Guild Member
Non-Guild Member

Age : 21
Location : New Jersey


http://www.flickr.com/photos/50744850@N05/

Back to top Go down

Re: BladeHunter Mech

Post by Bossk on Sun Jun 20, 2010 9:43 pm

That's a pretty nice Mech. I like the legs the most, though the arms need some work. The purple on the right arm seems to sort stand, so if possible maybe they could be replaced with a different color.
avatar
Bossk
Non-Guild Member
Non-Guild Member

Location : Behind you!


Back to top Go down

Re: BladeHunter Mech

Post by Axel on Mon Jun 21, 2010 8:08 am

Legomotion95 wrote:I like it, looks sort of Terminator-esque. Can we have an exploded view please Axel.

Lord Dane's frame, not mine: http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4498655

That's the gist of it.

Bossk wrote:That's a pretty nice Mech. I like the legs the most, though the arms need some work. The purple on the right arm seems to sort stand, so if possible maybe they could be replaced with a different color.

The arms gave me the most trouble with this MOC. The purple was selected specifically to stand out against the bley.
avatar
Axel
Non-Guild Member
Non-Guild Member

Age : 23
Location : Australia


Back to top Go down

Re: BladeHunter Mech

Post by Alpha Beta on Tue Jun 22, 2010 12:26 am

^You have to make it symmetrical, than it will be better.
avatar
Alpha Beta
Non-Guild Member
Non-Guild Member

Location : Somewhere my GPS doesn't know


Back to top Go down

Re: BladeHunter Mech

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum