Mech WIP
+6
Wickedskillz
N8
^Ninja Trooper^
Doraff
Troopa Daisy
Hazard with a Glove
10 posters
Page 1 of 1
Mech WIP
Gallery
Ounce I finished my Guild-Off entry against Faie, I still wanted to do something along the lines of the mecha/hardsuit theme. So I started a mush larger mecha. I only have 2 arms and 1 leg, and I do not know where I am goign with the rest of it. Unfortunately it may likely be doomed and never be finished, but Is= still wanted to post it incise I continue. The main problem, though, is that I lack the parts to continue. I cannot even build the next leg. I am also itching to do something else now. But for now, a bit of help on what I can do for the torso may get me closer to finishing it, or at least having a torso.
C@C Welcome!
Hazard with a Glove- Guild Member
- Age : 27
Location : Once upon a time, in a magical forrest....
Re: Mech WIP
A good tip I found for building hardsuits/mechs is that it is good to have areas around the outer area of the torso where you can attach clips that way it makes an easy way to attach the arms and legs and allow them to bend. ;The leg looks good so far but I don't like that piece for the shoulders.
Re: Mech WIP
Why don't you just make a torso and build from there. It would make the design easier to make.
Last edited by Doraff on Thu Aug 12, 2010 2:57 pm; edited 1 time in total (Reason for editing : I failed....)
Doraff- Non-Guild Member
- Age : 26
Location : I'm not where you think I am. I'm almost like a Clone Ninja.
Re: Mech WIP
Doraff wrote:Why don't you just make a torso and build from there. It would make the design easier to make.
A good tip I found for building hardsuits/mechs is that it is good to have areas around the outer area of the torso where you can attach clips that way it makes an easy way to attach the arms and legs and allow them to bend. ;The leg looks good so far but I don't like that piece for the shoulders. Wink Smile
I had good inspiration for the arms and the leg, but not for the body.
Hazard with a Glove- Guild Member
- Age : 27
Location : Once upon a time, in a magical forrest....
Re: Mech WIP
It looks good so far, obviously a WIP still! Make sure the legs and arms and Symmetric.
Guest- Guest
Re: Mech WIP
The_Customizer wrote:It looks good so far, obviously a WIP still! Make sure the legs and arms and Symmetric.
You would think that, because it's in the WIP section!
As I said in the chat-box, I like the shoulders and the arm joints.
^Ninja Trooper^- Guild Member
- Age : 28
Re: Mech WIP
MegaBump
Hey, anyone remember this old thing? I didn't until i found the wip locked away in a bucket...
So I continued with it until my winter brake ended. Right now it's what I'm calling the 'Prototype', but ounce it's finished it'll have a real name. Plus I'm going to make it fit in with my legion, so yeah.
Photo was taken in 5 minutes with my phone.
C@C is helpful!
Hey, anyone remember this old thing? I didn't until i found the wip locked away in a bucket...
So I continued with it until my winter brake ended. Right now it's what I'm calling the 'Prototype', but ounce it's finished it'll have a real name. Plus I'm going to make it fit in with my legion, so yeah.
Photo was taken in 5 minutes with my phone.
C@C is helpful!
Hazard with a Glove- Guild Member
- Age : 27
Location : Once upon a time, in a magical forrest....
Re: Mech WIP
Hmm...The hands are way too small, and I think a little protection to the driver should also be added, but otherwise, great job.
Re: Mech WIP
I like the leg and arm structure but the joint connections to the mech's body look a bit weak and awkward.
Re: Mech WIP
Oh, yes. Very. Although I'm still knew to mechs, I'd like to get better at making connections that are stable.Troopa Daisy wrote:I like the leg and arm structure but the joint connections to the mech's body look a bit weak and awkward.
Hazard with a Glove- Guild Member
- Age : 27
Location : Once upon a time, in a magical forrest....
Re: Mech WIP
Maybe you could extend the arms a bit? It would make it a much nicer mech when it looks like it actually has arms, not just stubs. The torso does need a bit more bulkiness, and protection o the driver could do that. Otherwise, nice work.
Re: Mech WIP
It's looking really good so far, but you need more joints. I don't know what image you have in your head, but whenever I build a suit I try to make it as human shaped as possible. The legs definitely need knees, in my opinion, and maybe an ankle joint too. One other suggestion, the hands look tiny compared to the wedges. Put a 1x1 tiles in the clip, then add 3 minifigure hands to it. Put two at the end in a V shape, then add a thumb to the side.
Other than those tiny nitpicks it's looking great.
Other than those tiny nitpicks it's looking great.
Re: Mech WIP
Thanks guys
I started making changes last night, hopefully I'll finish today.
I started making changes last night, hopefully I'll finish today.
Hazard with a Glove- Guild Member
- Age : 27
Location : Once upon a time, in a magical forrest....
Re: Mech WIP
Hmm... If you are going with the same design as your prototype, then I would advise against it... The torso didn't really fit in with the arms and legs; It was bulky, where as you're legs were thine, and you arms were short but not bulky.
Maybe if you could thin down the torso it would be better, but I don't know what you're doing right now, so you might have already changed it.
Maybe if you could thin down the torso it would be better, but I don't know what you're doing right now, so you might have already changed it.
why- Non-Guild Member
- Age : 29
Location : why do you need to know? You an agent?
Re: Mech WIP
All I can say is keep messing with it. You will keep improving that way.
What it needs:
Keep up the good work!
What it needs:
- Driver Protection
- Bigger hands
- Not so strait legs
- Better Joint connections from the leg to the body
Keep up the good work!
Re: Mech WIP
Sheesh Guys . Rhymes with Weaponry . Do you wanna get shot in the FACE? Maybe a giant chain gun or rocket launchers on both shoulders!
Re: Mech WIP
I say: Everything in life is easier when A: you intimidate others, B: carry a big gun or C: you have an atomic bomb in your basement. TEEHEE
Re: Mech WIP
Did you even think I am leaving weapons out for this stage of the build? It's going to have a story behind it, and why the 'Prototype' version doesn't have gun.CC Stark wrote:Sheesh Guys . Rhymes with Weaponry . Do you wanna get shot in the FACE? Maybe a giant chain gun or rocket launchers on both shoulders!
Realize one thing, it's rather difficult to make a mech this small that fits a fig, and still have everything I'd like it to. I hope to change that eventually though....Somehow...
Sunday Morning.
Monday Morning.
Hazard with a Glove- Guild Member
- Age : 27
Location : Once upon a time, in a magical forrest....
Re: Mech WIP
Okay, that reminds me of a Californa Governor that has way to much muscle and doesn't get to use it. But may I suggest a jump jet so the mech can scale small walls and buildings? And make the wrist a bit thicker if possible and "beefing" up the legs by adding armour, joints and every nerds favorite.....(I'm just making you wait MAHAHA!!) hydralic joints! They are in the bull dozer set and a few others. If you don't have any I'll give you some. BTW I have 4 hydralic joints.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|