How much would you pay for a Printed Torso
+7
Rook
Tac
CloneCommandoXion
Troopa Daisy
eclipsegrafx
N8
Dutch
11 posters
Page 1 of 1
How much would you pay
How much would you pay for a Printed Torso
Title Basically says it all.
How much would you pay for a printed double sided clone trooper torso with a specific design?
Thank you.
-Dutch
How much would you pay for a printed double sided clone trooper torso with a specific design?
Thank you.
-Dutch
Re: How much would you pay for a Printed Torso
You know, it kinda depends. If it were for maybe a normal clone (of no rank whatsoever, like Boil), 1 to 2 bucks, and maybe for a commander, $3. I hope everyone agrees with my opinions.
Re: How much would you pay for a Printed Torso
I would just follow arealight's pricing example on that one. ALTHOUGH they are only single sided I believe.
Also make sure your prices that you are posting on your poll don't cut into your profits. Meaning I doubt it will cost you less then 1-2$ to print these so don't list it as an option. Given the cheaper options some of the people will pick the cheapest possible hoping you will pay attention to that.
After our conversation on FM I would suggest 5-6$ if not 7$. I still want to know how to find a cheaper printer like you so I can reduce my prices as well.
Also make sure your prices that you are posting on your poll don't cut into your profits. Meaning I doubt it will cost you less then 1-2$ to print these so don't list it as an option. Given the cheaper options some of the people will pick the cheapest possible hoping you will pay attention to that.
After our conversation on FM I would suggest 5-6$ if not 7$. I still want to know how to find a cheaper printer like you so I can reduce my prices as well.
Re: How much would you pay for a Printed Torso
Probably about $2 for a slightly marked torso but maybe $3 if I get the exact design that I want (like Daze).
Re: How much would you pay for a Printed Torso
I'm gonna be honest here. If I could get printed items of my 602nd trooper designs, I would pay almost $10-12.
Re: How much would you pay for a Printed Torso
$6-7 if I was in to clones. Although I personally have given up with CW, there's a huge Market out there currently filled with very expensive decalled clones. These will be cheaper and last longer. Plus I know your designs will be your usual better than Lego standard.
Re: How much would you pay for a Printed Torso
Wait actually printed (like TLG's) that didn't rub off with a sneeze or decaled?
Re: How much would you pay for a Printed Torso
Thanks every one for your feedback.
That's right Rook. Printed Torsos just like TLC's.Rook wrote:Wait actually printed (like TLG's) that didn't rub off with a sneeze or decaled?
Re: How much would you pay for a Printed Torso
Ah ok edited poll to allow vote cancellation and increased value previously voted.
Re: How much would you pay for a Printed Torso
I would pay $4 if you were able to print my design onto white bodies.
Bizzle- Guild Member
- Age : 30
Location : here..I think...
Re: How much would you pay for a Printed Torso
I would pay $2 or $3 because I'm not very good with decals but I don't want to over pay.
train 01- VIP Former Staff
- Age : 25
Location : Maryland
Re: How much would you pay for a Printed Torso
Well if places like CAC and Minifigmaker charge 30 bucks for a fig and the only real customization is the full body decaling, a 7 dollar printed torso is a great deal by itself.
Admiral Snackbar- Age : 27
Location : I think I see a Walrus
Re: How much would you pay for a Printed Torso
Yeah $20-$30 for a full custom minifigure with accessories isn't bad.
Printed Legs $3-5 (Part and Labor)
Printed Torso $4-5 (Part and Labor)
Printed Head $3-5 (Part and Labor)
Printed Helmet $3-5 (Part and Labor)
Accessories $3-5 (Parts from BA or other source)
Shipping $4-5
Printed Legs $3-5 (Part and Labor)
Printed Torso $4-5 (Part and Labor)
Printed Head $3-5 (Part and Labor)
Printed Helmet $3-5 (Part and Labor)
Accessories $3-5 (Parts from BA or other source)
Shipping $4-5
Re: How much would you pay for a Printed Torso
^ & ^^ Those are my thoughts exactly. Thats why I am pursuing the printing as well.
Re: How much would you pay for a Printed Torso
4-5 dollars with 2-3 dollar shipping.
Hey man. This topic is three-hundred and sixty days old. Please do not post in topics older than two weeks. You might want to read through the guild constitution again. -JP
Hey man. This topic is three-hundred and sixty days old. Please do not post in topics older than two weeks. You might want to read through the guild constitution again. -JP
plagueofdarkness-
Similar topics
» Which Torso Desing would you like to see printed?
» Torso Decal vs Torso/belt Decals
» Printed Arealight Customs
» New printed helmets from Arealight!
» Shiny vs. Matte & Printed vs. Cloth
» Torso Decal vs Torso/belt Decals
» Printed Arealight Customs
» New printed helmets from Arealight!
» Shiny vs. Matte & Printed vs. Cloth
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum